Seat cushion covers – Summer evokes a feeling of rest and relaxation. In difficult economic times, people look for ways to find joy at home. One way to do it is to spend more time outdoors. But when you look outside all you see is the old wicker furniture disappeared from yesteryear that does not look very attractive. All you need is a little paint and a new seat cushion. You can even sew a new seat cushion covers for the chair itself.
If your chair is to be used outdoors, use the outdoor fabric. If the chair is inside, any type of fabric will do, but make sure it can be washed or cleaned by hand for convenience. Outer fabric is also a good choice for indoor furniture, because the fabric has been treated to resist water and stains. General spills roll right of the fabric. Your local fabric store likely carrying several options on the outer fabric. However, if you choose to use the seat cushion covers fabric, a microfiber is a good choice. It is resistant to stains and can be cleaned in situ.
Seat cushion covers, start by placing the fabric on a clean, flat surface, such as a dining table or on the floor. Measure the cushion on all sides and cut both an upper and a lower piece of fabric, leaving a seam allowance of 1 inch on all edges. Pin a Velcro strip on one side of the top and bottom of the pieces of fabric. Using the sewing machine, sew the velcro strips to the fabric, removing the pins as you work. Next, with the right inside, fix the other three sides together and then sew the pieces of fabric together with a 5/8 inch seam. Turn the cover of the right.